SinceVision has introduced the SGI-N030W, a wide-spot laser displacement sensor designed for high-speed, non-contact dimensional measurement on rough, textured and irregular surfaces. The unit combines an expanded laser spot with optical triangulation and extends the company's SGI Series portfolio. SinceVision is aiming it at lithium-ion battery manufacturing, semiconductor processing and precision mechanical engineering, where reliable micrometre-level measurement is required.
Wide spot versus point spot
Conventional point-spot laser displacement sensors concentrate reflected laser energy onto a small area, which makes the reading sensitive to microscopic surface features such as scratches, grain boundaries, brushed textures and matte finishes. Those features can introduce signal variations that are interpreted as dimensional changes, potentially producing false defect warnings and requiring additional inspection. The SGI-N030W instead collects reflected light across a broader surface area and averages localised microscopic peaks and valleys before signal conversion. SinceVision says this reduces the influence of surface roughness and optical scattering, giving more stable displacement readings on materials including drawn metals, sandblasted surfaces and coated battery foils.
Specified performance
The sensor has a 30 mm reference distance and a ±5 mm measurement range. SinceVision specifies repeatability of 0.05 µm on a diffuse white target under static conditions, together with linearity of ±0.02% of full scale across the range. Sampling runs at 50 kHz, equivalent to a 20 µs update interval. Communication options are RS485, 100Base-TX Ethernet and switchable analogue outputs carrying either 4–20 mA current or 0–10 V voltage signals. Master-slave synchronisation allows two heads to operate in opposition and measure from both sides of a component or moving material at the same time.
In-line electrode thickness
One principal application identified by the company is in-line thickness measurement of lithium-ion battery electrodes, where coating thickness and uniformity affect energy density, internal resistance and the long-term stability of cells. SinceVision notes that offline inspection with contact micrometers or drop indicators introduces operator variability and can deform wet or uncured electrode material, while periodic spot checks cannot provide continuous coverage of an entire production reel. In the proposed arrangement, two synchronised sensors sit above and below the moving electrode web on a calibrated, low-thermal-expansion marble gantry, each measuring its clearance to the material. A controller combines those readings with the fixed mounting datum to calculate absolute thickness in real time. SinceVision reports that production trials demonstrated stable, repeatable measurement within ±0.3 µm at a web speed of 300 mm/s. The 50 kHz sampling rate provides longitudinal resolution for detecting localised coating agglomerations, edge thinning and exposed substrate before the electrode reaches cell winding.
Semiconductor and motion applications
The SGI-N030W is also intended for semiconductor manufacturing, where non-contact operation matters on sensitive wafer surfaces. Cited uses include wafer position verification, edge detection, height measurement and checks of wafer seating and chuck alignment in atmospheric transfer modules and vacuum load-lock systems. In precision assembly, the sensor can monitor voice coil motors, linear actuators and micro-steppers; the 50 kHz sampling rate captures transient displacement, mechanical oscillation, settling behaviour and end-stop overshoot across the full measurement range. Position data can be transmitted to machine control systems over Ethernet for real-time monitoring and process control.
Surface-driven false alarms
Jack Li, global sales and marketing director at SinceVision, says false defect warnings caused by surface texture remain a recurring challenge in battery manufacturing and precision assembly. According to the company, conventional point-beam laser sensors can interpret microscopic scratches and rough coatings as actual thickness variations, slowing production lines and creating a need for additional manual inspection. The wider optical spot is designed to average out these surface-related variations, while synchronisation between opposing sensor heads is intended to support high-speed thickness verification.
