Industrial Machinery

KraussMaffei Extrusion Introduces Single-Stage PVC InlineMixing for Roofing Membranes

A continuous extrusion route replaces separate hot-cold mixing and dryblend storage, with the company reporting energy savings of up to 75 percent.

Hiroshi TanakaNovember 17, 20265 min read2 views
Concept illustration of a continuous extrusion line in which hoppers and liquid feeders supply a twin-screw extruder linked directly to calender rolls forming a wide PVC membrane.

KraussMaffei Extrusion has developed a single-stage extrusion process for PVC roofing membranes that replaces the conventional two-stage route built around a separate heating-cooling-mixing combination. The company presented the PVC InlineMixing process as a continuous alternative that it says reduces energy costs, shortens production time and supports a rapid return on investment.

In the established two-stage method, PVC powder, plasticizers, additives and fillers are processed batchwise in a hot-cold mixer to create a dryblend. After cooling and intermediate storage, that mixture is plasticized in a twin-screw extruder and formed into membranes. Under the InlineMixing concept, all solid and liquid components are instead metered directly into the extruder through gravimetric dosing systems in the required proportions.

Cost and flexibility claims

According to KraussMaffei, the continuous approach improves cost-effectiveness in several respects. No investment is needed in a separate heating-cooling-mixing combination, and the material is heated only once. Depending on the formulation, system parameters and location, the company states that energy consumption and related costs can fall by up to 75 percent.

Removing the separate mixing step also reduces the footprint of the overall system and lowers labor costs, according to the company. Maintenance requirements are described as lower because wear parts for the heating-cooling mixer are no longer required. KraussMaffei frames the combination of reduced capital expenditure and operating costs as the basis for a faster payback.

The process is also intended to make production more adaptable. Formula adjustments and color changes can be made during operation through the integrated control system, avoiding the preparation and intermediate storage of separate dryblend batches. Christopher Bartel, Head of Sales Flat & Foam at KraussMaffei Extrusion, said manufacturers gain a competitive advantage through lower production costs, greater flexibility and more efficient manufacturing, allowing them to respond faster to new requirements and adjust formulations during production while reducing energy and capital expenditure.

Development and validation

The PVC InlineMixing process was developed at the KraussMaffei Extrusion Technology Center in Laatzen and validated with industrial roofing membrane formulations. The work used a co-rotating twin-screw extruder from the ZE 65 BluePower series, equipped with loss-in-weight feeders for all solid components and multiple liquid feeders for free-flowing formulation ingredients.

The ZE BluePower series has a Da/Di ratio of 1.65. KraussMaffei says the combination of high torque and large free volume provides a wide process window for processing different formulations flexibly.

Tests confirmed high gelation levels of the PVC and high product quality, according to the company. The mechanical properties and weldability of the membranes also met industrial requirements across several formulations. Bartel said the results demonstrate the potential of PVC InlineMixing for industrial roofing membrane production, and that the Technology Center tests customers' specific formulations under production-relevant conditions, optimizes the process and prepares the basis for industrial implementation.

Industrial reference installation

PVC InlineMixing is already in use in an industrial production line for PVC roofing membranes. The reference plant achieves a total throughput of 1,800 kg/h with two extruders and two calenders. In that setup, PVC, additives, fillers and the resulting edge trimmings are processed continuously and directly into finished membranes.

KraussMaffei presents the process as a way to combine high product quality with a leaner production route, positioning PVC roofing membrane manufacturing as more cost-effective and more flexible. The published figures on energy savings and payback are company statements tied to formulation, system and location conditions rather than independently verified results.